High-density plasma etching of indium-zinc oxide films in Ar/Cl2 and Ar/CH4/H2 chemistries

The dry etching characteristics of transparent and conductive indium-zinc oxide (IZO) films have been investigated using an inductively coupled high-density plasma. While the Cl₂-based plasma mixture showed little enhancement over physical sputtering in a pure argon atmosphere, the CH₄/H₂/Ar chemistry produced an increase of the IZO etch rate. On the other hand, the surface morphology of IZO films after etching in Ar and Ar/Cl₂ discharges is smooth, whereas that after etching in CH₄/H₂/Ar presents particle-like features resulting from the preferential desorption of In- and O-containing products. Etching in CH₄/H₂/Ar also produces formation of a Zn-rich surface layer, whose thickness (∼40 nm) is well-above the expected range of incident ions in the material (∼1 nm). Such alteration of the IZO layer after etching in CH₄/H₂/Ar plasmas is expected to have a significant impact on the transparent electrode properties in optoelectronic device fabrication.     

A scheme for teleporting Schrdinger-cat states via the dispersive atom-cavity-field interaction

A proposal is presented for teleporting Schrding-cat states. The process of the teleportation is achieved through the dispersive atom-cavity-field interaction. In this proposal, only measurement on the cavity field and on the singlet atomic states are used.     

新疆野生黑加仑与马林果实的营养成分分析

通过对新疆野生黑加仑和野生马林的脂肪油，8种微量元素，17种氨基酸以及维生素C的含量进行测定得出：黑加仑脂肪油含量为17．9％，马林的脂肪油含量为22．3％，其中，黑加仑脂肪油中，r－亚麻酸的含量为19．02％，而马林中，其含量为9．40％，黑加仑中K，Na,Ca,Cu,Zn,Fe的含量比马林中的含量高，而Mn,Mg元素的含量却比马林含量低；马林的维生素C含量为16．22mg/g，黑加仑的含量为108mg/g，黑加仑的氨基酸的总量为1．63％，马林为1．14％。     

一维无序体系电子跳跃导电研究

建立了电子隧穿电导模型,推导了一维无序体系新的直流电导公式.通过计算20000格点无序体系的直流电导率,分析了直流电导率和温度及外场电压的关系,讨论了无序度对直流电导的影响.计算结果表明,无序体系的直流电导率随无序度的增加而减小;外加电场较小时,电导率相对较大,且出现一系列峰值,电压较大时,电导率反而较小;无序体系在低温区出现了负微分电阻特性,电导率随温度的升高而增大,在高温区电导率随温度的升高而减小.计算结果和实验符合很好 关键词： 无序体系 电子隧穿 直流电导率     

A TVD Type Wavelet-Galerkin Method for Hamilton-Jacobi Equations

In this paper,we use Daubechies scaling functions as test functions for the Galerkin method,and discuss Wavelet-Galerkin solutions for the Hamilton-Jacobi equations.It can be proved that the schemesare TVD schemes.Numerical tests indicate that the schemes are suitable for the Hamilton-Jacobi equations.Furthermore,they have high-order accuracy in smooth regions and good resolution of singularities.     

Comparison of the boundary theory with the contact rule of phase regions and Gupta’s method

The phase boundary theory and the contact rule of phase regions are compared, and some weaknesses of the latter are manifested. The comparison between the Gupta’s method and the boundary theory method for constructing multicomponent isobaric sections is also presented.     

Einstein relation in chemically doped organic semiconductors

Based on the assumption of Gaussian energy distributions of the lowest unoccupied molecular orbital (LUMO) and the highest occupied molecular orbital (HOMO), analytical expressions of generalized Einstein relation in chemically doped organic semiconductor are developed, by approximation of Coulomb traps with a rectangle potential well. Numerical calculations show that traditional Einstein relations do not hold for chemically doped organic semiconductors. Similar to physical doping, the dependence of diffusion coefficient to mobility D/μ ratio on the carrier concentration has a maximum. An essential difference between chemical doping and physical doping is that, the D/μ ratio in chemically doped organic semiconductors depends not only on carrier concentration and doping concentration, but also on the applied electric field. PACS 71.20.Rv; 72.90.+y; 73.50.-h     

Non-Euler–Lagrangian Pareto-optimality Conditions for Dynamic Multiple Criterion Decision Problems

In this paper the problem of verifying the Pareto-optimality of a given solution to a dynamic multiple-criterion decision (DMCD) problem is investigated. For this purpose, some new conditions are derived for Pareto-optimality of DMCD problems. In the literature, Pareto-optimality is characterized by means of Euler-Lagrangian differential equations. There exist problems in production and inventory control to which these conditions cannot be applied directly (Song 1997). Thus, it is necessary to explore new conditions for Pareto-optimality of DMCD problems. With some mild assumptions on the objective functionals, we develop necessary and/or sufficient conditions for Pareto-optimality in the sprit of optimization theory. Both linear and non-linear cases are considered.     

Crystal and molecular structure of (μ-p-CH3C6H4C2S) (μ-n-C3H7S)Fe2(CO)6Co2(CO)6

The crystal and molecular structure of the complex containing cobalt-carbon and iron-sulfur cluster cores, (μ-p-CH₃C₆H₄C₂S) (μ-n-C₃H₇S)Fe₂(CO)₆Co₂(CO)₆, has been determined by X-ray diffraction method. The crystals are triclinic, space group P&1bar;, with a — 9.139(2), b=9.610(1), c-17.183(2) Å, α = 84.36(1), β-89.45(1), γ=88.15(1)°, V-1501.0 ų; Z=2, D_c=1.74 g/cm³. R=0.072, Rw=0.081. The results of the structure determination show a cobalt-carbon cluster core formed through the reaction of (μ-p-CH₃C₆H₄C₂S)(μ-n-C₃H₇S)Fe₂(CO)₆ with Co₂(CO)₈. In the cobalt-carbon cluster core, the bond length of the original C≡C lengthened to 1.324 Å which is close to the typical value of carbon-carbon double bond. The groups connecting the carbons of the cluster core are in cis position and lie on the opposite side of cobalt atoms. In this complex, the conformation of —SC₃H₇ is e-type, while that of —SC₂C₆H₄CH₃ is a-type.     

Interior point cutting plane method for optimal power flow

In this paper, an interior point cutting plane method (IPCPM)is applied to solve optimal power flow (OPF) problems. Comparedwith the simplex cutting plane method (SCPM), the IPCPM is simpler,and efficient because of its polynomial-time characteristic.Issues in implementing IPCPM for OPF problems are addressed,including (1) how to generate cutting planes without using thesimplex tableau, (2) how to identify the basis variables inIPCPM, and (3) how to generate mixed integer cutting planes.The calculation speed of the proposed algorithm is further enhancedby utilizing the sparsity features of the OPF formulation. Numericalsimulations on IEEE 14-300-bus test systems have shown thatthe proposed method is effective.